Install the ceiling rails about 7 cm below the ceiling, leaving some space between the window, wall, or any mouldings to let the curtain drape naturally. The brackets provided easily slide onto the rail and should be distributed evenly. Place the two outermost brackets about 10 cm from each end of the rail, and space the rest of the brackets roughly 60 cm apart along the length of the rail. Secure the brackets to the ceiling with screws that match your ceiling's surface. If you're unsure about the type of screws to use, feel free to ask your local hardware store for guidance.

For double-layer installation: If you have double-layer curtains with two separate ceiling rails, the innermost ceiling rail 1 should be mounted in the ceiling with a 5 cm gap from the window, wall, or cornice. The outer rail 2 should be mounted in the ceiling with an 11 cm gap from the inner ceiling rail (16 cm from the window, wall, or cornice).

Click here to learn how to install your ceiling rail.

Wall rails are installed using the provided wall brackets. The two outermost wall brackets should be placed about 5-8 cm inside each end of the curtain rail, while the remaining wall brackets are evenly distributed along the rail, approximately 60 cm apart. Attach the brackets to the wall, using screws that suit the material of your walls, for securing the rail. If you're not sure which screws to use, don't hesitate to ask your local hardware store for advice. Once the wall brackets are screwed into the wall, attach the plastic brackets to each wall bracket, and tighten the screw so the rail can be easily clipped on.

Click here to learn how to install your wall rail.